Sears Int'l UK - Sears Sears Int'l UK - Sears

Kenmore refrigerator water line hookup, this spring, keep it cool with up to 50% off

The kit provides you with the required parts to hook up a water line to your refrigerator. Connect the line to the water line connector on the back of the refrigerator.

This will control the water flow and water pressure to the refrigerator. If tightening the connection does not stop the leak, turn off the water, remove the connector and add additional thread-seal tape before reconnecting the water line.

Coil the excess water line behind the refrigerator.

Us dating online

Wrap the female thread on the opposite end of the adapter with thread-seal tape. Do not twist the nuts too tight as this could damage the supply valve, the supply line and the adapter.

Leave the excess water line behind the refrigerator.

It takes patience, but you can hook a water line up to your refrigerator on your own. Turn off the supply line. Twist the male end of a quick-tee adapter onto the valve.

Attach the free end of the copper tubing to the valve. You'll want to use water lines that are already in place if possible, rather than attempting to install new pipes. Watch for leaks at all the connections. Twist the faucet supply line onto the female end of the adapter.

Thread the ferrule from the kit onto the new line. Push the refrigerator against the wall.

Cute things to say to a guy youre dating

Attach one end of the copper tubing to the refrigerator's water pipe, using a nut and ferrule. Attach a water valve to the T-fitting. The valve connected to the right side of the faucet is the cold water supply line. Shut off the water supply.

Online dating for environmentalists

Insert the new water line into the opening on the tee. Now the refrigerator is connected.

Rock fm dating

Slide the compression nut over the male threads and tighten it on the adapter. You may have three water supply lines beneath the sink; two lines connect directly to the faucet while the third line connects to the dishwasher.